Polyester Decorative Calcium Silicate Panels Ministry of Land, Infrastructure, Transport and Tourism (MLIT)
noncombustibility certification NM-1453,
NM-3468 (single color), NM-1453 (patterned)
AICA high-board
noncombustible

To Noncombustible
Decorative Panel Top Page
Multipurpose polyester decorative calcium silicate panels

Special Senior Citizens Nursing Care Home: Secure, Design: Hokuto Planning Co., Ltd.

  • Recommended Use
    • Bathroom Walls
    • Sanitary walls
    • Entrance walls
    • Interior walls
    • Hallway walls
  • Structure
  • Edge Specs
    • There is 2 edge treatment type for SL(-grain).
      To order C-face, cut end painted specifications, please write “C” after the item number.

  • Spec & Design Cost
    Edge specs Color pattern Item No. Size *3 Thickness Weight / sheet Design cost Pkg. vol. Lead time
    4-sided 1C Cut end unpainted*1

    single
    color

    SR-□N
    (excluding SR-6400)
    3×6
    (910×1,820mm)
    +1,-0mm
    6mm 10.2kg JPY6,500/sheet
    〈JPY3,900/㎡〉(excluding tax)
    4sheet

    regular
    stock

    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY8,600/sheet
    〈JPY3,900/㎡〉(excluding tax)
    SR-6400N
    SR-7101N
    3×6
    (910×1,820mm)
    +1,-0mm
    10.2kg JPY8,600/sheet
    〈JPY5,200/㎡〉(excluding tax)
    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY11,500/sheet
    〈JPY5,200/㎡〉(excluding tax)
    SR-□N
    (custom-made pattern)
    3×6
    (910×1,820mm)
    +1,-0mm
    10.2kg JPY7,400/sheet
    〈JPY4,500/㎡〉(excluding tax)
    20 sheets or more (4-sheet units)

    2 weeks

    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY9,800/sheet
    〈JPY4,500/㎡〉(excluding tax)
    Cut away

    wood
    grain

    SL-
    (custom-made pattern)
    3×6
    (910×1,820mm)
    +1,-0mm
    10.2kg JPY8,600/sheet
    〈JPY5,200/㎡〉(excluding tax)
    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY11,500/sheet
    〈JPY5,200/㎡〉(excluding tax)

    abstract
    stone

    SA-
    (custom-made pattern)
    3×6
    (910×1,820mm)
    +1,-0mm
    10.2kg JPY10,000/sheet
    〈JPY6,000/㎡〉(excluding tax)
    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY13,500/sheet
    〈JPY6,000/㎡〉(excluding tax)
    2-sided 1.5C Cut end painted

    wood
    grain

    SL-□C
    (C face painted) *2
    3×6
    (910×1,820mm)
    +1,-0mm
    10.2kg JPY10,900/sheet
    〈JPY6,600/㎡〉(excluding tax)
    3×8
    (910×2,420mm)
    +1,-0mm
    13.6kg JPY14,500/sheet
    〈JPY6,600/㎡〉(excluding tax)

    *1:1C faces are painted.un *2:Only the C face for SL-(wood grain) can be painted. ※3:Please inquire separately about other sizes.
    Caution 1: Please note that the above delivery schedule may change depending upon the order volume, product sizes and timing. Please inquire at your nearest AICA dealer.

  • Caution
    • When using Aica high-board noncombustible for kitchen walls, please do NOT use around high-heat areas such as around cooking stoves or ranges.
    • For residential housing kitchen walls, please use Cerarl.
    • Please bear in mind during the design process that the polyester resin surfaces of Aica high-board noncombustible do have certain resin odor.
  • Maintenance
    • Use a soft cloth or sponge dabbed with a neutral detergent to wipe away surface dirt, followed by wiping with a water-moistened cloth or sponge. After wiping with water, be sure to then wipe dry with a cloth to remove moisture. Do not use a nylon or steel wool scrub brush or abrasive detergent as it may causes scratches.
    • Do not use acidic or alkaline determent as it may cause some discoloration to occur.
  • Storage and Handling
    • Avoid placing panels directly on the ground or on concrete, but stack on palettes or the like. (Please lay the panels flat to prevent warping.)
    • Do not place objects or step on the top of the stack.
    • Do not store near rainwater or places exposed to moisture. direct sunlight or extremely low or high temperatures.
    • Do not stack upright as this can produce warping.
    • Please be careful not to prevent application of strong force or pressure on the products’ cut surfaces as it may cause cracking or damage.

For more information about AICA Marless Noncombustible Board
(available only in Japanese)