A non-combustible decorative panel comprised of high temperature and high pressure press formed melamine resin impregnated decorative layers and a specialized non-combustible core. Cerarl was recipient of the Good Design Award in 2012.

Ashikaga Japanese Red Cross Hospital, Designer: Akihiro Kondo, Koji Yonezawa and Reiko Takashima, Design Management: Nikken Sekkei Ltd.

Main Characteristics of Cerarl
  • Recommended Applications
    • Kitchen walls
    • Sanitary walls
    • Bathroom walls
    • Entrance walls
    • Interior walls
    • Passageway walls
    • Passageway walls
    *1. Be careful when using around stoves.
    *2 Not including bathrooms. Not including areas where water is directly applied such as by a hose, etc.
    *3 Use Cerarl for Bathrooms in bathrooms.Ordinary Cerarl cannot be used in bathrooms.
  • Structure
  • Specifications / Design Costs
    Item No. Supported Sizes Thickness Design Cost Weight per Panel Pkg. vol
    FAN
    FAS
    FKM
    FKJ
    FJN
    FJS
    3×6 ※1 3mm JPY13,600/panel
    (8,000/m2)
    (Excl. Tax)
    8.8 2 panels
    3×8 JPY18,200/panel
    (8,000/m2)
    (Excl. Tax)
    11.6
    FJ
    FTN
    (Celsus Type)
    3×8 3mm JPY19,800/panel
    (8,700/m2)
    (Excl. Tax)
    11.6
    FANA
    FASA
    FKMA
    FKJA
    FJNA
    FJSA
    3×6 ※1 3mm JPY15,000/panel
    (8,650/m2)
    (Excl. Tax)
    8.8 1 panel
    3×8 JPY19,800/panel
    (8,700/m2)
    (Excl. Tax)
    11.6
    3×9 ※1 JPY20,500/panel
    (8,000/m2)
    (Excl. Tax)
    13.0
    4×8 ※1 JPY24,200/panel
    (8,000/m2)
    (Excl. Tax)
    15.4
    FJA
    FTNA
    (Celsus Type)
    3×8 3mm JPY22,000/panel
    (9,600/m2)
    (Excl. Tax)
    11.6

    *1: Supported patterns are limited.

  • Made-to-Order Patterns Supported (Standard Delivery Time [1]: 3 Weeks)
    Flat Specification
    Supported Sizes Thickness Design Cost Weight per Panel Unit Order
    3×8 3mm *Prices vary according to pattern and surface finish. For details, please contact the nearest AICA supplier. 11.6 From 6 sheets
  • Made-to-Order Sizes Supported (Standard Delivery Time [1]: 3 Weeks)
    Flat Specification
    Supported Sizes Thickness Design Cost Weight per Panel Unit Order
    3×10 3mm JPY22,800/panel
    (JPY8,000/m2)
    (Excl. Tax)
    14.6 From 6 sheets
    4×8 JPY24,200/panel
    (JPY8,000/m2)
    (Excl. Tax)
    15.4
    4×10 JPY30,300/panel
    (JPY8,000/m2)
    (Excl. Tax)
    19.3
    Embossed Specification (Standard Thickness: 3 mm)
    Supported Sizes Thickness Design Cost Unit Order
    3×10 14.6kg JPY24,800/panel
    (JPY8,700/m2)
    (Excl. Tax)
    From 6 sheets
    4×8 15.4kg JPY26,400/panel
    (JPY8,700/m2)
    (Excl. Tax)
    4×10 19.3kg JPY33,000/panel
    (JPY8,700/m2)
    (Excl. Tax)
    *Availability is limited depending on pattern and finish. For details, please contact the nearest AICA supplier.
    [1] Delivery times may differ to that stated depending on the order quantity, size, or time at which the order is received, etc. For details, please contact the nearest AICA supplier.
  • Specifications
    • Only one side (the side covered with a protective film) of Cerarl products is decorative.
    • Used for wall surfaces, but the underside is not sanded as standard.
    • If you require sanding, please add an "S" at the end of the item number when ordering.
  • Maintenance
    • To remove dirt from the surface, use moistened melamine foam (melamine sponge) or wipe away the dirt with a soft cloth dabbed in a neutral detergent. Be sure to use a dry cloth to wipe away the moisture. Do not use a nylon scrub brush, steel wool, or abrasive detergent.
  • Storage and Handling
    • Avoid storing directly on the ground or concrete floors, but store flat on palettes. (Please be sure to stack flat to prevent warping.)
    • Do not place objects on to the stack or step on top of it.
    • Do not store near rainwater or places exposed to moisture, direct sunlight, or extremely low or high temperatures.
    • Do not stack upright. Doing so may cause warping.

For more information about CERARL
(available only in Japanese)